A green synthesis and characterization of Zn-Al-CO3 and Ni-Al-CO3hydrotalcite catalysts by using grinding methods
International Journal of Development Research
A green synthesis and characterization of Zn-Al-CO3 and Ni-Al-CO3hydrotalcite catalysts by using grinding methods
Received 20th January, 2019; Received in revised form 06th February, 2019; Accepted 19th March, 2019; Published online 29th April, 2019
Copyright © 2019, Varsha Sharma et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
The study of different types of synthesis of hydrotalcites were studied. In the current research, hydrotalciteslike Zn-Al-CO3 and Ni-Al-CO3 were synthesized using the grinding method. The reaction conditions were optimized and the best results and yields were obtained at room temperature keeping the pH constant in 30 minutes. The effect of different molar ratios of hydrotalcites were also investigated and were further characterized using XRD, FTIR, and TGA. The results exhibited that the hydrotalcites were synthesized as the synthesized samples were found to be identical to the reported hydrotalcites materials. The confirmation was done on the basis of X-ray diffractogram and FTIR. Generally, the results exhibited the effect of molar ratio on the structure and material properties of hydrotalcites synthesized.
